blank

job vacancy PT Saipem Indonesia

PT Saipem Indonesia is engaged in the construction and installation of petroleum and natural gas. The company was founded in 1995 and headquartered in Jakarta, Indonesia. Saipem Indonesia operates as a subsidiary of Saipem International BV, an oil and gas contractor industry headquartered in Amsterdam, The Netherlands. Currently, PT Saipem Indonesia reopens new job vacancies in May 2020. Below are the positions currently available for job seekers who are interested in developing your career with PT Saipem Indonesia Persada with the following qualifications.


Currently, PT Saipem Indonesia reopens new job vacancies in December 2020. Below are the positions currently available for job seekers who are interested in developing your career with PT Saipem Indonesia with the following qualifications.

 

Job Vacancies at PT Saipem Indonesia

 


1. Offshore Structure Engineer
  1. Education: University Graduate on Technical Major
  2. Working Experiences: More than 8 years in similar position or similar field
  3. Working Status: Temporary / Contract
  4. Work location: Jakarta

Qualification

  1. Basic knowledge of structural engineering design criteria, methods and workflows from conceptual phase up to site engineering phase. Capability to define technical documents set based on project quantities and scope of work. Capability to perform and coordinate project engineering documents productions activities and to check and review design documents, prepare either internally or by vendors.
  2. Capability to write comprehensive technical reports with clear indication of basic data, assumptions, limitations, references, tracing of calculation, summary and conclusion.
  3. Deep knowledge on using SACS software. Able to develop SACS model of all type of offshore structure including but not limited to geometry, boundary conditions, materials, marine growth and corrosion, added mass, loads (gravity, environmental, live loads, etc), and other offshore specific parameters.
  4. Basic knowledge of main international structural standards, codes, and regulations. Capability to analyse dedicated project requirements in terms of local standards and codes and to identify proper implementation actions.
  5. Capability to predict and understand the static and dynamic behaviour of complex steel structures typical of the offshore industry. Able to propose proper action or modification to the structure being analysed in order to improve or optimize the structure.
  6. Basic knowledge of the key issues related to yard fabrication and erection activities, load out, sea transport and offshore installation of jackets, decks, modules and offshore buildings.
2. Structural Tekla Designers
  1. Department/Project: Offshore Engineering (STRUCTURAL)
  2. Education: University Graduate on Technical Major
  3. Working Experiences: More than 8 years in similar position or similar field
  4. Working Status: Temporary / Contract
  5. Work location: Jakarta

Qualification

  1. Knowledge of tools related to 2D and 3D modelling activities and specific knowledge of drafting drawing techniques
  2. Knowledge of main international Discipline standards, codes and regulations.
  3. General knowledge of the main typologies of offshore structures.
  4. Knowledge of tools to prepare bill of material and/or material take off.
3. Structural Checker / Coordinator Designers
  1. Department/Project: Offshore Engineering (STRUCTURAL)
  2. Education: University Graduate on Technical Major
  3. Working Experiences: More than 10 years in similar position or similar field
  4. Working Status: Temporary / Contract
  5. Work Location: Jakarta

Qualification

  1. Knowledge of tools related to 2D and 3D modelling activities and specific knowledge of drafting drawing techniques
  2. Knowledge of main international Discipline standards, codes and regulations.
  3. General knowledge of the main typologies of offshore structures.
  4. Knowledge of tools to prepare bill of material and/or material take off.
  5. Engineering resource coordination, planning and scheduling as well as multidisciplinary interface and coordination.